how to recover winload.exe corrupt or missing (0xc0000221)

It can be a hassle to always have a floppy disk around and some machines don't even have a floppy drive. To solve this one can try to add the 3rd party drivers to the recovery console installation.

1. Install the Recovery Console
2. Go to the %systemroot%\cmdcons
3. Copy your driver raidcntr.sys to %systemroot%\cmdcons
4. Make a copy of the %systemroot%\cmdcons\txtsetup.sif for backup in case something goes wrong
5. Open the %systemroot%\cmdcons\txtsetup.sif with a text editor
6. Search for the text "ultra66" and you should find:

   ultra66.sys = 1,,,,,,3_,4,1

   Make a copy of the line and place it below and change ultra.sys to raidcntr.sys :

   raidcntr.sys = 1,,,,,,3_,4,1

7. Search again for the text "ultra66" and you should find:

   PCI\VEN_105A&DEV_4D38 = "ultra66"

   Now open the TXTSETUP.OEM which comes with your driver raidcntr.sys and find the Hardware Id of your controller. Ex.:

   [HardwareIds.scsi.raid_win200]
   id = "PCI\VEN_105A&DEV_0D30&SUBSYS_4D33105A","raidcntr"

   Create a new line under "ultra66"-line using the Hardware Id for your controller. Ex.

   PCI\VEN_105A&DEV_0D30&SUBSYS_4D33105A = "raidcntr"

8. Search again for the text "ultra66" and you should find:

   ultra66 = ultra66.sys,4

   Make a copy of the line and change the ultra66 to raidcntr:

   raidcntr = raidcntr.sys,4

9. Search again for the text "ultra66" and you should find:

   ultra66 = "Promise Technology Inc. Ultra66 IDE Controller"

   Make a copy of the line and change the text to something you like:

   raidcntr = "My Personal RAID Controller"

10. Save the txtsetup.sif file and reboot and select the Recovery Console at the boot menu

Note the above guidelines have worked fine with an A7V Onboard Promise Fasttrak100 controller.

When the system begins to POST are you able to hit F8 a few times and try to access the Recovery Screen?  If so are you able to use LAST KNOWN good configuration to see if you are able to get backup and running?

If not, can you boot into Safemode from that F8 screen?

If those options aren't available, the best step would be to get your Windows Vista Recovery CD and boot to it and run the STARTUP REPAIR options.

Here is a Help and How to article about the STARTUP Recovery options.

Also, see the following links for further information involving the winload error

• What to do if Windows won't start correctly
• Startup repair: frequently asked questions
• What are the system recovery options in Windows Vista?
•  

Pasted from <http://windowshelp.microsoft.com/Windows/en-US/Help/d95a0730-91af-4d46-8800-583531946be41033.mspx>

You may also want to review the information about Windows PE CD.  If you do not have your Original Windows CD.

http://technet.microsoft.com/en-us/magazine/2006.11.windowspe3.aspx

Please use the above troubleshooting steps to diagnose the issue, then let us know of what results are found and we will assist you further.

Window Xp Tricks:Quicker Startups

Enable Quicker Startups with a Boot Defragment:

There is a way to speed up XP startup: make your system do a boot defragment, which will put all the boot files next to one another on your hard disk. When boot files are in close proximity to one another, your system will start faster.

On most systems, boot defragment should be enabled by default, but it may not be on yours, or it may have been changed inadvertently. To make sure that boot defragment is enabled on your system, run the Registry Editor [Hack #68], and go to:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Dfrg\BootOptimizeFunction
Edit the Enable string value to Y if it is not already set to Y. Exit the Registry and reboot. The next time you reboot, you'll do a boot defragment.

-----------------------------------------------------------------------------------

There is a simple trick to make your Windows XP, Windows 7 computer startup process faster. Your computer will take only 10 seconds to complete startup process after implementing this trick on your windows computer. Generally a windows XP computer takes some time to complete startup process. Besides Windows 7 computer takes more time comparatively. You have to wait while starting your computer so that it completes startup process then you can continue your work.

Earlier we have discussed simple trick to Shut down computer instantly. There are simple settings in Windows XP, Windows 7 computers called StartupDelaywhich is set up to higher value by default. This causes some delay while making startup process on your computer. But you can assign lower values to make windows startup process faster.

You can follow simple steps given below to make your windows XP, Windows 7 computer startup process faster: -

• Go to Start >> Run. Type regedit in it and hit Enter
• This command will open registry editor. Now browser registry editor folders as HKEY_LOACAL_MECHINESYSTEMCurrentControlSetContr olContentIndex

• You will see a key named StartupDelay in right hand side panel. Double click on this key.
• A new pop up settings window will open. By default, Here Value data is assigned some higher value which makes windows startup process slower. Change value data to some lower value like 30000.

• Now press OK.

Second Step.

Your computer initiates some processes automatically while starting windows. These programs takes some time to start and can make windows start up process slower. You can disable these extra programs which will not start automatically on windows startup.

Just follow these simple steps to disable extra programs: -

• Go to Start >> Run
• Type msconfig in it and press Enter.
• A System Configuration settings windows will open. Go to General Tab and select Selective startup, Load System Services and Load startup items.
• Now go to Startup tab. Deselect some applications or programs which you don’t want to start automatically on windows startup.

• Finally press Apply and OK.
• Reboot your computers. Now It will start in approximately 10 seconds.

In this way you can make your windows computer startup process faster which will take only 10 seconds to complete startup process.

**HACK BSNL BROADBAND**

This is a simple trick to hack bsnl broadband accounts...... no need to worry because it does not have any danger........
* know your ip address:- from this site:- http://www.whatismyip.com/
* Download:- ip scanner from site :-http://www.angryziber.com/w/Download
* open ip scanner.
* go to options tab\ select port\ and enter 80 in the 1st option. (enter port to scan)
* In the hostname option paste your ip address.....
* Click on the ip button next to the hostname(the one with a green arrow pointing up words..)
* After u click on it, it will automatically fill the ip range option..
* In the 1st option let it be your ip and the in the 2nd option fill ip greater than your.....(eg. ip your ip is 59.94.40.213 then in the next option fill as 59.94.45.213)
* click scan..
* it will give u a list of ips....
* there will be some ip's which will have a green light on its left side.
* select that ip and press :- ctrl +1 (not the no. pad one) or right click on that ip and select the option 'open computer' and then select the option in browser.....
* then it will ask for user name and pass.
* in user name type :- admin
* in pass type :- admin
* if it does not take try on other ip's with green light.
* when the page gets open go to home and click on 'WAN'.
* there u will get the users id and pass in coded form....
* download this password revealer:- http://www.scanwith.com/X-Pass_download.htm
* Extract file from that and then run 'x-pass'.
* drag the 'x' icon in the pass. field and u will get the pass.
* to check the pass :-http://10.240.160.195/webLogin.jsp

thats it........ enjoy..........
Note: This trick usually work for me and my friends but i can say theat it would work with your network too.

Do leave your comments.......